In gunsmithing, “thou” is a handy shorthand for one thousandth of an inch, or 0.001 inch. Learn how the term appears in pistol clearances and tolerances, where a few thou can matter—and why these small imperial measurements are still common at the workbench.

Multiple Choice

What does a gunsmith often use as slang for the measurement term 'thousandths'?

In gunsmithing, measurements are often given in thousandths of an inch, and the slang used for that unit is thou. So when someone says a clearance is a few thou, they mean a few thousandths of an inch (0.001 inch each). This usage fits the imperial inch system typical in firearm work, and you’ll see tolerances described as 0.002", 0.003", etc., spoken as two thou, three thou, and so on. Milli would imply metric thousandths (a thousandth of a meter), which isn’t the context here, and deci or hundo correspond to tenths or hundredths, not thousandths. Hence thou is the best fit for the slang in this setting.

A gunsmith may describe a tiny gap as “a few thou.” It’s an informal way to say a few thousandths of an inch, with one thou equal to 0.001 inch. The word comes up often around hammer-fired pistols, where small measurements can help explain how parts fit and move.

That doesn’t mean every pistol needs to be measured down to the last fraction. It does mean that understanding the language can make a conversation with a gunsmith clearer. A phrase like “three thou of clearance” sounds less mysterious once you know the scale: it means 0.003 inch, a very small distance indeed.

A small word for a small measurement

In firearm work that uses the inch system, “thou” is common shop slang for one thousandth of an inch. The plural often stays the same: someone might say “two thou,” “five thou,” or “several thou.” In writing, the same measurement may appear as 0.002", 0.005", or another decimal value.

The decimal point matters. A measurement of 0.003 inch is three thousandths of an inch—not three hundredths, and not three tenths. Those values are much larger:

  • 0.001 inch is one thou.

  • 0.010 inch is ten thou, or one hundredth of an inch.

  • 0.100 inch is one tenth of an inch.

It’s easy to mix up the places when the numbers are small. Think of a dollar divided into coins: each decimal place changes the size of the slice. The first three digits after the decimal point mark thousandths of an inch.

Why gunsmiths talk in thou

Pistol parts often meet across very small spaces. A gunsmith may discuss a gap, a fit, or a change in a part using thousandths because that scale is useful for describing close mechanical relationships. The language is compact, too. “Two thou” is quicker to say than “two thousandths of an inch,” especially when people already share the same measurement system.

Hammer-fired pistols make a helpful example. In this design, a hammer moves to strike the firing pin, which then transfers force to the cartridge’s primer. The hammer and its related parts work within a larger assembly of springs, pins, and surfaces. Their movement and fit are part of how the pistol functions, so precise language can help when describing the mechanism.

Still, a measurement alone doesn’t tell the whole story. Two parts can have the same measured gap and behave differently because of their shape, material, finish, wear, or position. A number is useful, but it needs context—rather like knowing a door is three feet wide without knowing whether it’s open, shut, or blocked by a sofa.

Inches, millimeters, and a common mix-up

“Thou” belongs to the inch-based system. It should not be confused with “milli,” which is a metric prefix meaning one thousandth of a unit. A millimeter is one thousandth of a meter, while a thou is one thousandth of an inch. They’re both small units, but they describe different lengths.

That distinction matters because the units aren’t interchangeable. One millimeter is about 0.039 inch, while one thou is 0.001 inch. So a millimeter is much larger than a thou. If a measurement is written without its unit, it can be easy to misread, especially when switching between metric and imperial tools or specifications.

The safest habit is simple: look for the unit, not just the number. A value such as “0.2” means very little on its own. It could refer to inches, millimeters, or something else entirely. In technical conversations, confirming the unit can prevent a small misunderstanding from growing into a big one.

What “a few thou” does—and doesn’t—tell you

In ordinary conversation, “a few thou” gives a rough sense of scale. It signals that the distance being discussed is small. But it isn’t a complete specification, and it shouldn’t be treated as one. The exact measurement, the part being discussed, and the manufacturer’s guidance all matter.

That’s especially true with firearms, where safety depends on the complete condition of the pistol—not one number in isolation. A casual phrase may be enough for a quick conversation, but detailed inspection or repair calls for proper references, suitable measuring equipment, and qualified expertise. A gunsmith can assess the full assembly rather than guessing from a single clearance.

Measurement tools also have limits. A ruler won’t reliably show a few thousandths of an inch. Calipers or other suitable precision tools can read smaller dimensions, though the method and tool need to match the job. Even then, technique matters: pressure, alignment, surface condition, and calibration can all affect a reading. Precision sounds like a number, but it’s really a whole chain of careful steps.

The useful part is shared understanding

Technical slang can sound like a private language at first. “Thou” is a good example: short, familiar in some workshops, and easy to misunderstand if the unit isn’t clear. Once the meaning clicks, though, the term becomes a practical shorthand for describing small dimensions in inch-based gunsmithing.

That shared language is useful around hammer-fired pistols and other mechanical systems, but clarity should come first. If someone says a part has “three thou” of something, it’s reasonable to ask what is being measured and whether the figure is in inches. Good technical communication leaves less room for guesswork.

So, when a gunsmith says “thou,” they mean thousandths of an inch—one thou equals 0.001 inch. It’s a tiny unit with a big role in precise conversation. And like any shop term, it works best when everyone knows exactly what it refers to.